ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 201 of 381
FRAMES
displays Level 2 information/supervisory (I/S) frames sent and received and I/S
frame ratios. Level 2, the link layer, is the communications interface to the
controller defined by the line type.
I
represents the information frames.
S
represents the supervisory frames.
U
represents the unnumbered (nonsequenced) frames.
For Expand-over-IP and Expand-over-ATM Level 2 i/s frames have these
meanings:
 IFrm(S/R) displays number of Data Frames sent and received.
 SFrm(S/R) displays number of Connect Commands sent and rcvd.
 UFrm(S/R) displays number of Connect Responses sent and rcvd.
For Expand over SERVERNET Level 2 i/s frames have these meanings:
 IFrm(S/R) displays number of Data Frames sent and received.
 SFrm(S/R) displays number of Active Connect Cmnds sent & rcvd.
 UFrm(S/R) displays number of Passive Connects sent & rcvd.
HISTO
displays a histogram of the message size distribution. The histogram provides
information about message sizes less than the values of 64, 128, 256, 512, 1024,
2048, and 4096.
IP
displays the Expand statistics for Expand lines configured using either the IP
transport or the ATM transport. Only lines configured using IP or ATM are
displayed. Statistic counters reported are:
DFrame
Number of data frames sent and received.