ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 203 of 381
PATH
displays Expand statistics only for Expand Multiline Path process subtype 1. You
can use this option with all other LH options.
POOL
displays pool use. The information includes:
 Current and maximum percentage of pool used
 Number of pool failures
 Current and maximum percentage of message buffer used
 Current and maximum percentage of out-of-sequence buffer used
 Number of times the out-of-sequence timeout has elapsed
RATES
displays counts normalized to number per second.
SAMPLES count
specifies the number of sample periods to display. A sample period is defined by
the RATE option in the SET command. You can specify 0 through 255 sample
periods.
STATE
shows all attributes that have an associated state. Associated states are displayed
for the Expand command without any options, and the disk command with these
options: IP, PATH, LINE, RATE, PERCENT(Default).
TIME hh:mm m/d/y
defines the ending time of the display information in hours, minutes, month, day,
and year. For example, specifying ―TIME 10:15‖ when the rate is 5 indicates that
statistics collected from 10:10 to 10:15 are displayed.
When a ―?‖ appears immediately after the timestamp, it indicates that the statistics
are questionable and that there was a problem obtaining the statistics. Possible
reasons for questionable statistics include a down line handler or a down path.
When a ―<‖ appears immediately after the timestamp, the statistics were received
late by the Collector process. Late statistics indicate busy Expand lines.