ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 204 of 381
hh
is the hour.
mm
is the minute.
m/d/y
is the month, day, and year. Valid m/d/y entries are mm/dd/yy,
yyyy/mm/dd, or mm/dd/yyyy.
USE
displays statistics about current pool usage. For percentages, see the POOL
option.
RAW
displays RATES data in a dense tabular format rather than the standard ASAP
sparse format.
LH Statistics
The following table lists the LH statistics and options shown by the HELP NETSTATS
command.
Table 6-6. LH Statistics and Options
Statistics
Options
BCC
Total number of block-check character errors in this sample.
FRAME
Number of Level 2 I/S frames sent and received, and I/S ratios.
HISTO
Message size histogram <64 <128 <256 <512 <1024 <2048 <4096.
INFO
LDEV, primary/backup PIDs, subtype, and ASAP error, if any.
IP
Displays statistics for Expand lines using the transports IP or ATM.
L4LINKS
Total number of Level 4 links (logical messages) sent and received.
L4NAKS
Total number of Level 4 NAKs sent and received.
L4PACKETS
Total number of Level 4 packets (local+passthru) sent and received.
L4PASSTHRU
Total number of Level 4 packets (passthru only) sent and received.
LINE
Displays statistics for subtypes 0, 2, 3, 4, and 6.
NOB
Total number of no-frame-buffer errors in this sample.
OPER
Number of Level 4 operations sent and received: CONN, TRCE,
NCPM,LREQ, LCOMP, CAN, ACK, NAK, ENQ, and PCHG.
PATH
Displays statistics for Multiline PATH process subtype 1.