ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 231 of 381
 Home terminal name of the process
TIME hh:mm m/d/y
specifies the ending time of the display information in hours, minutes, month, day,
and year. For example, specifying ―TIME 10:15‖ when RATE is 5 indicates that
statistics collected from 10:10 to 10:15 are displayed.
hh
is the hour.
mm
is the minute.
m/d/y
is the month, day, and year. Valid m/d/y entries are mm/dd/yy,
yyyy/mm/dd, or mm/dd/yyyy.
PROCESSBUSY Statistics
The following table lists the PROCESSBUSY availability information and options
displayed with the HELP PCBSTATS command.
Table 6-9. Processbusy Statistics and Options
Statistics
Description/Options
Affinity
The IPU affinity of the process
Busy
The percent CPU busy on non-blade system. Percent IPU busy on
blade system
CBusy
The percent CPU busy on non-blade system. Percent CPU busy
averaged across IPUs in CPU on blade system (Cbusy=Busy/IPUs).
CPU Time
The process time in hours, minutes, and seconds
Elapsed Time
The total time in days since the process was created
Home
Terminal
The home terminal name of the process
IPU
The IPU that the Process was last running in
LCB
The average number of link control blocks (LCBs) in use or reserved
by this process
Name
The process name
Pages
The number of physical memory pages currently in use
PFR
The process flag: P=privileged, F=page fault, R=process ready to
run