ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 261 of 381
PARAMETERS "DISK-param [DISK-param}..." | null
specifies the disk-specific parameter string to be passed to the ASAPDSK
process at startup time. The parameter list must be enclosed in quotation
marks. The default is null. DISK-param values are:
CPU cpu-number
defines the CPU where the MEASFH process resides. If an unavailable
CPU is selected, the ASPDSK process selects the next available CPU.
The default is the same as the CPU that the ASAP CI is executing in.
NOMEAS
prevents disk performance statistics from being collected. Disk state
information, and the disk information GBUsed, Capacity, MB Available, and
%MBUsed are collected during each sample period. On D-series nodes,
disk controller and unit information is displayed. On G-series nodes,
Group, Slot, and Module information is displayed.
RATE minutes
defines the interval, in minutes, that disk statistics are reported back to the
Collector. The default is the ASAP rate.
VOLUME [$ volume] [.] [ subvolume]
specifies the location of the Measure data. The maximum file size is
approximately 60 KB. This file is used by the Measure subsystem to obtain
DP2 disk counters. The file is deleted when the ASAP Monitor stops the
ASPDSK process.
The default location is $SYSTEM.SYSTEM.
SWAPVOL [$ volume]
specifies the location for the MEASFH swap volume.
The default is $SYSTEM.
Example
+SET DISK ON, PARAMETERS "SUBVOL ASAPMEAS, RATE 15"
EDL filename
defines and compiles a file containing ASAP Entity Definition Language (EDL)
statements. EDL is used within ASAP to define all entities and their attributes. You
can enter multiple SET EDL commands, but a maximum of 10 EDL files are