ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 287 of 381
Examples
This example synchronizes all the nodes in the network twice a day, first at 2:30
a.m. and again at 5:00 a.m.
+SET SYNC 150, 2
+STARTUP \*
SYNCSLOW ON | OFF
defines the clock synchronization algorithm. The SET SYNC option controls when
time-of-day synchronization occurs. The SET SYNCSLOW option controls the
algorithm. You can manually correct the time on any node with the TACL SETTIME
command, regardless of how SET SYNC or SYNCSLOW is set.
ON
adjusts the time-of-day clock on remote ASAP nodes very slowly to avoid
sudden time of day changes. This algorithm slowly adjusts the time of day
regardless of the time difference between the correct time on the central ASAP
Collect node and the incorrect time on the Remote node.
OFF
causes the ASAP clock synchronization algorithm to make instantaneous time
changes if the time difference between the central Collect node and the
Remote node is greater than two minutes. Uses slow synchronization only if
the time difference between the central Collect node and the Remote node is
less than two minutes.
The default is OFF
TAPE entity-option [, entity-option]
determines the settings and parameters for the Tape entity.
The default is OFF, $SYSTEM.SYSTEM.ASAPTAP.
CPU cpu-num
defines the CPU that the TAPE SGP process will reside in.
ON|OFF
enables or disables network-wide tape availability reporting.
OBJECT ASAP-tape-program-filename
specifies the name of the Tape SGP file. The default is
$SYSTEM.SYSTEM.ASAPTAP.