ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 289 of 381
PARAMETERS "TCP-param [ TCP-param ]... " | null
specifies the TCP specific parameter string to be passed to the ASAPTCP
process at startup time. The default is the <null> string.
The Parameter list must be enclosed in double quotes.
TCP-param options are:
TRACE
turns on $RECEIVE trace to the EMS and ASAP log files.
RATE minutes
defines the interval, in minutes, that TCP statistics are reported back to
the Collector. The default is the ASAP RATE. The range is from 1 to
120 minutes.
SCPNAME $name
defines the SCP process name the SGP will use to retrieve statistics
from the TCP/IP and Telserv subsystems. If no SCPNAME is
specified, the SGP will attempt to start one but security concerns could
prevent a successful start of an SCP process.
TCP n
defines the minimum number of minutes the SGP will wait before
reconfiguring TCP processes when they are being automatically
configured by the SGP. The default is 60 minutes.
ROUTE n
defines the minimum number of minutes the SGP will wait before
reconfiguring TCP Routes when they are being automatically
configured by the SGP. The default is 60 minutes.
SUBNET n
defines the minimum number of minutes the SGP will wait before
reconfiguring TCP subnets when they are being automatically
configured by the SGP. The default is 60 minutes.
TELNET n
defines the minimum number of minutes the SGP will wait before
reconfiguring Telserv processes when they are being automatically
configured by the SGP. The default is 60 minutes.