ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 381 of 381
Please set ObjectivesEventState to LOW, MEDIUM or HIGH when using escalating or
de-escalating goals
Cause
An escalating or de-escalating goal was entered but the setting for SET
OBJECTIVESEVENTSTATE is higher than the HIGH state.
Effect
EMS events and/or actions created by escalating or de-escalating goals might not be
emitted.
Recovery
Change the setting for OBJECTIVESEVENTSTATE to LOW, MEDIUM or HIGH.
At least one attribute value (attribute-name) in an escalating or de-escalating goal
does not escalate or de-escalate. Escalating goal values (<,<<,<<< operators) should
increase and de-escalating goal values (>,>>,>>>) should decrease at each level to
avoid unpredictable results.
Cause
An escalating or de-escalating goal was entered that specified incorrect values.
Effect
EMS events and/or actions can be created at unexpected times.
Recovery
For an escalating goal the values should increase at each level, and for a de-escalating
goal the values should decrease at each level. Re-enter the goal command using values
that properly increase or decrease depending on the operator type.