ASAP 3.2 Server Manual

HP NonStop ASAP Server Manual Page 83 of 381
+DISK
<statistics output for disk on local system>
+DISK \REMOTE
<statistics output for disk on system \REMOTE>
+PB
<statistics for processbusy on local system>
+SPOOLER
<statistics output for spooler on local system>
There are many command options for each entity command. For more information, see
Section 6: ASAP Conversational Interface Commands.
Shutting Down the ASAP Collector and ASAP
Monitors
The SHUTDOWN command stops the Collector or Monitor processes. The Monitor
also shuts down all executing SGPs in each CPU. Stop the remote monitors first, then
the collection node’s Monitor, and finally the Collector process. This example shows
the ASAP SHUTDOWN command:
+SHUTDOWN \CHICAGO !Shuts down the Monitor in Chicago
+SHUTDOWN \NY !Shuts down the Monitor in New York
+SHUTDOWN !Shuts down the local node
+SHUTDOWN \* !Shuts down all the Monitors in the network
+SHUTDOWN COLLECT !Shuts down the Collector process on the local node
+SHUTDOWN \CHICAGO COLLECT !Shuts down the Collector process on the Chicago
node
Synchronizing the Time of Day on Selected
Nodes
ASAP can synchronize the time of day between selected nodes. This is useful when
you want to synchronize a monitored node’s internal Greenwich Mean Time (GMT) to
the GMT of the Collection node. For example:
+SYNC \CHICAGO ! sync \CHICAGO GMT time to the Collection nodes GMT
+SYNC \* ! sync GMT time for all nodes to the Collection nodes GMT
The ASAP Collector process should reside on the node where the system
management functions are performed. This node has the correct internal GMT time of
day set. Synchronizing to the collection node typically ensures that the nodes
throughout the network has the correct time of day. The monitor on the specified node
synchronizes that node’s time of day with the node where its Collect process resides.