ASAP OpenView Smart Plug-In Manual

Installing the OpenView Smart Plug-In for ASAP
HP NonStop ASAP OpenView Smart Plug-In Manual—529444-001
2-2
Automated Installation
The Smart Plug-In for ASAP installation uses portions of OpenView in order to load the
Smart Plug-In policy into the OpenView environment. The ASAP OpenView policy
cannot be installed if OpenView is not present on the server. For that reason, perform
the Smart Plug-In installation after you install OpenView. If you cannot do so, then once
you do install OpenView on the server, you will need to either reinstall the Smart Plug-
In or else manually install the policy. (See Manual Installation.)
Automated Installation
The preferred method for installing the Smart Plug-In for ASAP is to use the automated
setup wizard. This wizard prompts you for all necessary information and installs the
Smart Plug-In for ASAP components automatically.
To perform an automated installation of the Smart Plug-In for ASAP:
1. Open Windows Explorer.
2. Launch the Smart Plug-In for ASAP automated setup wizard.
a. If you are installing from the ASAP Client CD, navigate to the OpenView Smart
Plug-In folder on the CD drive (for example, D:\OpenView SPI), and double-
click SPIForASAPSetup.exe.
b. If you are installing a downloaded version of the Smart Plug-In, navigate to the
folder where you saved the downloaded file and double-click
SPIForASAPSetup.exe.
3. Follow the on-screen instructions to complete the installation.
4. To verify that all components were installed correctly, follow the steps described in
Verifying the Installation on page 2-4.
Manual Installation
If automated installation is not available to you, you can install the Smart Plug-In for
ASAP on your server manually. For example, you might need to repair the Smart Plug-
In installation because it has become corrupted in some way. Rather than attempting to
remove and reinstall the Smart Plug-In, you can simply repair the Smart Plug-In
installation itself. To do so, you need to have access to the Smart Plug-In component
files:
These files were installed as part of any prior setup. In addition, you must have access
to the OpenView utility program ovpmutil.exe. Typically, this program is installed into
OVOAdapter.exe OVOAdapter.chm OVOAdapter.ico
HHActiveX.dll HP OpenView
Smart Plug-In for
ASAP Reference
Guide.doc
HP OpenView Smart
Plug-In for ASAP
Reference Guide.pdf
ReadMe.txt ASAP.mm ASAP-opcmsg.policy