ASAP OpenView Smart Plug-In Manual

Removing the OpenView Smart Plug-In for ASAP
HP NonStop ASAP OpenView Smart Plug-In Manual—529444-001
3-3
Manual Removal
The ASAP OpenView Adapter is removed from the server.
Manual Removal
If you initially installed the ASAP OpenView Adapter using the manual installation
method, you can remove it manually.
To manually remove the Adapter:
1. Delete Adapter configuration information. This step is optional. If you are removing
the Adapter, but you plan to reinstall it at some point and want to retain any user-
configured Adapter options, skip to Step 2. If you do not plan to reinstall or do not
want to retain user-configured option settings, open a Command Prompt window
and navigate to the Adapter program folder (C:\Program Files\Tandem\SPI for
ASAP). Enter:
OVOAdapter -CleanRegStatus
Press Enter to remove all configuration data from the system. This message
appears:
2. Delete Adapter registration information. In the Command Prompt window, enter:
OVOAdapter -UnRegServerStatus
Press Enter to remove all Adapter registration information from the system.This
message appears:
3. Delete HHActiveX.dll file registration information and the HHActiveX.dll file. (This
shared file might be used by other applications, so continue with this step only if
you are certain no other applications require it. If you are unsure, skip to Step 4.) In
VST013.vsd
VST014.vsd