ASAP OpenView Smart Plug-In Manual

HP NonStop ASAP OpenView Smart Plug-In Manual—529444-001

4-1

Configuring the ASAP OpenView

Adapter

Once you install the HP OpenView Smart Plug-In for ASAP on your OpenView server,

you need to activate the ASAP OpenView Adapter within the OEM in order to utilize it.

In addition, you might also want to tailor how the Adapter interacts with your OpenView

environment. The next sections describe how to activate and configure the Adapter.

OEM Gateway Adapter Configuration

The ASAP subsystem furnishes data to the ASAP OpenView Adapter and therefore

OpenView through the ASAP Open Enterprise Management Gateway (OEM). In order

for the OEM to send data to the Adapter, you must first activate the Adapter within the

OEM's configuration:

1. On your OpenView server, start the ASAP Client.

2. From the Client's main window, select View…Options. The ASAP Properties

dialog box appears.

3. Click the OEM tab in the dialog box.

4. Select the Open Enterprise Management check box if it is not already selected:

VST015.vsd