Asynchronous Terminals and Printer Processes Configuration and Management Manual

Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
ix
About This Manual
The Asynchronous Terminals and Printer Processes Configuration and Management
Manual describes how to plan, configure, and manage the ATP6100 subsystem.
This manual includes:
•
A configuration “quick start” that provides the basic information required to enable
you to quickly and easily define and start the ATP6100 subsystem.
•
An explanation of the major features and capabilities of the ATP6100 subsystem.
•
An explanation of how to configure the ATP6100 subsystem
•
A description of the Subsystem Control Facility (SCF) interactive interface for the
ATP6100 subsystem, including detailed reference information for each of the
ATP6100 subsystem SCF commands.
Who Should Use This Manual
This manual is intended primarily for system managers responsible for installing and
managing the ATP6100 subsystem. It may also be used for reference by application
programmers using ATP6100 lines for data communications.
It is assumed that you are already familiar with the HP system configuration process
and have access to the WAN Subsystem Configuration and Management Manual and
installation documentation.
How this Manual Is Organized
Table 1 summarizes the contents of this manual.
Table 1. Summary of Contents (page 1 of 2)
Section Title This section . . .
1 Configuration Quick Start
Provides the basic information required to
enable you to quickly define and start the
ATP6100 subsystem.
2 Overview of the ATP6100
Subsystem
Provides an overview of ATP6100 and the
configuration programs that can be used with
ATP6100.
3 Configuring the ATP6100
Subsystem
Describes the steps for configuring a ATP6100
subsystem and provides examples.
4 Printer Profiles and Default
Modifiers
Provides a brief overview and lists the
contents of the printer profiles, and describes
all printer modifiers.