Asynchronous Terminals and Printer Processes Configuration and Management Manual

Managing ATP6100 Using the
Subsystem Control Facility (SCF)
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
6-18
INFO SU Command
Display of the INFO SU (PRINT, TYPE 5) Command
The format of the display for SU object without the DETAIL option is shown below.
Alterable modifiers are denoted with an asterisk. Refer to Section 4, Printer Profiles
and Default Modifiers, and Section 5, Terminal Profiles and Default Modifiers. for
detailed descriptions of these modifiers.
The format of the display for SU object with the DETAIL option is shown below.
Alterable modifiers are denoted with an asterisk. Refer to Section 4, Printer Profiles
and Default Modifiers, and Section 5, Terminal Profiles and Default Modifiers. for
detailed descriptions of these modifiers.
Consideration for the INFO SU Command
•
The information displayed by the INFO command depends upon the current type of
the device.
ATP6100 INFO SU
Name *Type *Recsize *Charsize
$ATPS1.#TERM (5,4) 132 7
ATP6100 Detail INFO SU $ATPS1.#TERM
NAME...............$ATPS1.#TERM *TYPE................(5,4)
*RECSIZE...........132 *CHARSIZE............7
*AUTOANSWER........ON *AUTOBAUD............OFF
*CTSFLOW...........OFF *DELAYTIME...........0
*FULLDUPLEX........ON *ETXFLOW.............OFF
*ETXFLOWCHAR.......3 *INTERFACE...........RS232
*LINE1FORMF........OFF *MODEM...............OFF
*PARITYCHK.........ON *PARITY..............EVEN
*REVTPAUSE.........OFF *SISO................OFF
*SPACING...........POST *SPEED...............9600
*STOPBITS..........1 *TPAUSE..............OFF
*VFU72LINES........OFF *XFERSIZE............0
*XOFFCHAR..........0 *XONCHAR.............0
*NORESETONOPEN.....OFF *FORMEJECT...........ON
*HPITCH............0