Asynchronous Terminals and Printer Processes Configuration and Management Manual

Managing ATP6100 Using the
Subsystem Control Facility (SCF)
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
6-29
STATUS LINE Command
DETAIL
If present, returns complete status information. If you omit DETAIL, only a single
line of data is displayed for each object name.
Display for the STATUS LINE Command
The display for a LINE object without the DETAIL option is as follows:
Name
is the name of the line.
State
is the summary state of the line.
PPID
is the CPU number and the primary Process Identification (PID) number of the line.
BPID
is the CPU number and the backup PID number of the line.
I/O ADDR
is the address for the ATP6100 line. The four fields displayed are, from left to right,
CHANNEL, PATYPE, CLIPNUMBER, and LINENUMBER. The CHANNEL field is
no longer used. A value of 4 in the PATYPE field indicates that the line is an IP
node. The CLIPNUMBER and LINENUMBER fields identify the line on the
SWAN/SWAN 2 enclosure.
Track Id
is the unique identification of the concentrator (adapter).
ATP6100 STATUS LINE
Name State PPID BPID I/O Addr Track Id
$ATPS1 STARTED (2,62) (3,62) 0,4,%3,%0 A00001