Asynchronous Terminals and Printer Processes Configuration and Management Manual

Managing ATP6100 Using the
Subsystem Control Facility (SCF)
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
6-30
STATUS LINE Command
The display for a LINE object with the DETAIL option has the following format:
State
indicates the current summary state.
Ldev
is the logical device number of the line.
Path
indicates the primary path to the CLIP.
I/O Addr
indicates the address of the ATP6100 line in the form (PATYPE, CLIPNUMBER,
LINENUMBER). A value of 4 for PATYPE indicates that the line is an IP node.
CLIPNUMBER and LINENUMBER identify the line on the SWAN/SWAN 2
enclosure.
Track Id
indicates the unique identification of the concentrator (adapter).
CLB Frame Size
is the CLB frame size in bytes.
Primary Trace
indicates whether trace is turned on or off for the primary process.
Preferred IP
indicates the preferred IP address used by the process.
ATP6100 Detail STATUS LINE line-name
State.................STARTED
PPid...............(2,62)
Ldev..................68
BPid...............(3,62)
Path..................A In Use.............NO
I/O Addr..............0,4, %3, %0 CMG Ldev...........76
Track ID..............A00001
CMG................$ZZW01
CLB Frame Size........150 Dev
Type...........(53,0)
Primary Trace.........OFF Backup Trace.......OFF
Preferred IP..........172.016.020.054
Alternate IP..........172.016.020.056