Asynchronous Terminals and Printer Processes Configuration and Management Manual

Managing ATP6100 Using the
Subsystem Control Facility (SCF)
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
6-32
STATUS SU Command
STATUS SU Command
The STATUS SU command displays the dynamic information of a subdevice. STATUS
SU is a nonsensitive command.
Command Syntax for the STATUS SU Command
The STATUS SU command has the following syntax:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SU subdevice-name
designates the subdevice for which dynamic information is to be displayed. If you
omit subdevice-name, information for the assumed subdevice is displayed (see
the SCF Reference Manual for G-Series RVUs or SCF Reference Manual for
H-Series RVUs for details about the ASSUME command).
DETAIL
if present, returns complete status information. If you omit DETAIL, only a single
line of data is displayed for each object name.
Display for the STATUS SU Command
The display for a SU object without the DETAIL option is as follows:
Name
is the name of the line.
State
is the summary state of the line.
Path
is the primary path to the CLIP.
STATUS [ / OUT file-spec / ] SU subdevice-name [ , DETAIL ]
ATP6100 STATUS SU
Name State Path SubdevNumber
$ATP1.#TERM STARTED A 1