Asynchronous Terminals and Printer Processes Configuration and Management Manual
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 Configuration Quick Start
- 2 Overview of the ATP6100 Subsystem
- 3 Configuring the ATP6100 Subsystem
- 4 Printer Profiles and Default Modifiers
- 5 Terminal Profiles and Default Modifiers
- 6 ManagingATP6100Usingthe SubsystemControlFacility(SCF)
- 7 PTrace Facility for ATP6100
- A ATP6100 Subsystem Error Messages
- B SCF Command Summary for ATP6100
- ABORT LINE Command
- ABORT SU Command
- ACTIVATE SU Command
- ALTER LINE Command
- ALTER SU Command
- INFO LINE Command
- INFO SU Command
- LOAD LINE Command
- START LINE Command
- START SU Command
- STATS LINE Command
- STATS SU Command
- STATUS LINE Command
- STATUS SU Command
- STOP LINE Command
- STOP SU Command
- SUSPEND SU Command
- SWITCH PROC Command
- TRACE LINE Command
- VERSION PROC Command
- C Moving to G-Series or H-Series RVUs
- Glossary
- Index
Managing ATP6100 Using the
Subsystem Control Facility (SCF)
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
6-40
TRACE LINE Command
keywords
is subsystem-specific. See Table 6-4 for a list of the keywords that can be
used with ATP6100.
number
is the numeric value represented by a keyword.
TO file-spec
specifies that a new trace is to be started and names the file to receive the trace
information. An old file of that name is purged of data before the trace is initiated. If
file-spec does not exist, SCF creates the file with an extent size based on the value
of the PAGES parameter.
If TO file-spec is not specified, the existing trace is either stopped (if STOP is
specified) or modified as specified by trace-option.
WRAP
specifies that when the trace file end-of-file mark is reached, trace data wraps
around to the beginning of the file and overwrites any data there. If WRAP is not
specified, the trace is stopped when the end-of-file mark is reached. You cannot
change the specification of the WRAP option during an ongoing trace.
Some subsystems may automatically select this option. Refer to the SCF
Reference Manual for a specific subsystem for more information about TRACE
command options.
Table 6-4. Keywords and Values for the TRACE LINE Command
Keyword Value Meaning
ALL -1 Traces all items
L1 1 CLB Driver
L2 2 Level-2 state machine
L3 3 Level-3 state machine
L4 4 Level-4 state machine
L5 5 Level-5 state machine
CLBI 10 CLB inbound-frame tracing
CLBO 11 CLB outbound-frame tracing
CLIPDI 16 CLIP to communications line data in trace
CLIPDO 17 CLIP to communications line data out trace
CLIPL2 21 CLIP level-2 protocol trace
CLIPL3 22 CLIP level-3 protocol trace
CLIPL4 23 CLIP level-4 protocol trace