Asynchronous Terminals and Printer Processes Configuration and Management Manual
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 Configuration Quick Start
- 2 Overview of the ATP6100 Subsystem
- 3 Configuring the ATP6100 Subsystem
- 4 Printer Profiles and Default Modifiers
- 5 Terminal Profiles and Default Modifiers
- 6 ManagingATP6100Usingthe SubsystemControlFacility(SCF)
- 7 PTrace Facility for ATP6100
- A ATP6100 Subsystem Error Messages
- B SCF Command Summary for ATP6100
- ABORT LINE Command
- ABORT SU Command
- ACTIVATE SU Command
- ALTER LINE Command
- ALTER SU Command
- INFO LINE Command
- INFO SU Command
- LOAD LINE Command
- START LINE Command
- START SU Command
- STATS LINE Command
- STATS SU Command
- STATUS LINE Command
- STATUS SU Command
- STOP LINE Command
- STOP SU Command
- SUSPEND SU Command
- SWITCH PROC Command
- TRACE LINE Command
- VERSION PROC Command
- C Moving to G-Series or H-Series RVUs
- Glossary
- Index
ATP6100 Subsystem Error Messages
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
A-6
About ATP6100 Errors
ATP6100 Error 00525
Cause. The ALTER SU command for the ETXFLOWCHAR modifier failed because
either subtype is not 32 or ETXFLOW is disabled.
Effect. The ALTER SU command is not executed.
Recovery. Alter the ETXFLOWCHAR modifier only if either the subtype is 32 or if
ETXFLOW is enabled.
ATP6100 Error 00529
Cause. The START command was rejected due to an invalid SU configuration.
Effect. The START command is not executed.
Recovery. Alter the SU modifiers to the correct combination.
ATP6100 00525 Altering ETXFLOWCHAR failed because either
subtype is not 32 or ETXFLOW is disabled.
ATP6100 00529 START COMMAND FAILED DUE TO WRONG SU
CONFIGURATION.