Asynchronous Terminals and Printer Processes Configuration and Management Manual

SCF Command Summary for ATP6100
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
B-4
SWITCH PROC Command
SWITCH PROC Command
The SWITCH PROC command causes the backup CIU path to become the primary
CIU path and the primary CIU path to become the backup CIU path.
TRACE LINE Command
The TRACE LINE command initiates, modifies, or terminates trace mode on ATP6100
lines. Using TRACE, you can request capture of target-defined data items, alter trace
parameters, and end tracing. TRACE LINE is a sensitive command.
An SCF trace produces a trace file that can be displayed using PTrace commands.
The trace file is created by SCF. The PTrace utility is described in Section 7, PTrace
Facility for ATP6100.
VERSION PROC Command
The VERSION PROC command displays the version level of the specified process.
SWITCH [ / OUT file-spec / ] [ PROC proc-name ]
TRACE [ / OUT file-spec / ] LINE line-name
{ , STOP [ , BACKUP ] }
{ [ , BACKUP ]
[ , COUNT count ]
[ , NOCOLL ]
[ , PAGES pages ]
[ , RECSIZE sizes ]
[ , SELECT select-spec ]
[ , TO file-spec ]
[ , WRAP ]... }
VERSION [ / OUT file-spec / ] [ PROC objname ] [ , DETAIL ]