Asynchronous Terminals and Printer Processes Configuration and Management Manual
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 Configuration Quick Start
- 2 Overview of the ATP6100 Subsystem
- 3 Configuring the ATP6100 Subsystem
- 4 Printer Profiles and Default Modifiers
- 5 Terminal Profiles and Default Modifiers
- 6 ManagingATP6100Usingthe SubsystemControlFacility(SCF)
- 7 PTrace Facility for ATP6100
- A ATP6100 Subsystem Error Messages
- B SCF Command Summary for ATP6100
- ABORT LINE Command
- ABORT SU Command
- ACTIVATE SU Command
- ALTER LINE Command
- ALTER SU Command
- INFO LINE Command
- INFO SU Command
- LOAD LINE Command
- START LINE Command
- START SU Command
- STATS LINE Command
- STATS SU Command
- STATUS LINE Command
- STATUS SU Command
- STOP LINE Command
- STOP SU Command
- SUSPEND SU Command
- SWITCH PROC Command
- TRACE LINE Command
- VERSION PROC Command
- C Moving to G-Series or H-Series RVUs
- Glossary
- Index
Configuring the ATP6100 Subsystem
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
3-3
Profile Object Files and Associated Protocols
Profile Object Files and Associated Protocols
The PROFILE object in the WAN subsystem specifies the device protocol to be used
on that particular line. Profiles contain modifiers and default modifier values for the
different ATP6100 devices. You create a profile from an object file provided by HP or
from a previously created profile. This subsection introduces the object files provided
by HP for ATP6100
Table 3-1 defines the object files that are provided by HP for ATP6100. These object
files are installed in $SYSTEM.SYSnn.
Note. You can use SCF commands from the WAN subsystem to list profiles and to view the
modifiers contained in a profile. The INFO PROFILE command lists the devices that are using
a specified profile and lists modifiers and modifier values contained in the profile. The INFO
DEVICE command can display the profile used for the specified device. For more information
about these SCF commands, refer to the WAN Subsystem Configuration and Management
Manual.
Table 3-1. ATP6100 Object Files
Object File Name Profile Name Supported Device
$SYSTEM.SYSnn.PATP5512 PATP5512 5512 printer
$SYSTEM.SYSnn.PATP5515 PATP5515 5515 printer
$SYSTEM.SYSnn.PATP5516 PATP5516 5516 printer
$SYSTEM.SYSnn.PATP5520 PATP5520 5520 printer
$SYSTEM.SYSnn.PATP5530 PATP5530 5530 printer
$SYSTEM.SYSnn.PATP5540 PATP5540 5540 printer
$SYSTEM.SYSnn.PATP5573 PATP5573 5573 printer
$SYSTEM.SYSnn.PATP5577 PATP5577 5577 printer
$SYSTEM.SYSnn.PATPPRT PATPPRT Nonstandard
$SYSTEM.SYSnn.PATP6401 PATP6401 6401 terminal
$SYSTEM.SYSnn.PATP6402 PATP6402 6402 terminal
$SYSTEM.SYSnn.PATP6511 PATP6511 6511 terminal
$SYSTEM.SYSnn.PATP6512 PATP6512 6512 terminal
$SYSTEM.SYSnn.PATP6520 PATP6520 6520 terminal
$SYSTEM.SYSnn.PATP6524 PATP6524 6524 terminal
$SYSTEM.SYSnn.PATP6530 PATP6530 6530 terminal
$SYSTEM.SYSnn.PATP6603 PATP6603 6603 terminal
$SYSTEM.SYSnn.PATP6604 PATP6604 6604 terminal
$SYSTEM.SYSnn.PATPTERM PATPTERM Nonstandard