Asynchronous Terminals and Printer Processes Configuration and Management Manual

Contents
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
ii
4. Printer Profiles and Default Modifiers
Creating an ATP6100 Line-Handler Process (continued)
Adding an ATP6100 Device 3-5
Starting the ATP6100 Line 3-7
4. Printer Profiles and Default Modifiers
Printer Profiles 4-1
PATP5512 Profile 4-2
PATP5515 Profile 4-3
PATP5516 Profile 4-4
PATP5520 Profile 4-5
PATP5530 Profile 4-6
PATP5540 Profile 4-7
PATP5573 Profile 4-8
PATP5577 Profile 4-9
PATPPRT Profile 4-10
Printer Modifiers 4-11
5. Terminal Profiles and Default Modifiers
Terminal Profiles 5-1
PATP6401 Profile 5-2
PATP6402 Profile 5-3
PATP6511 Profile 5-4
PATP6512 Profile 5-5
PATP6520 Profile 5-6
PATP6524 Profile 5-7
PATP6530 Profile 5-8
PATP6603 Profile 5-9
PATP6604 Profile 5-10
PATPTERM Profile 5-11
Terminal Modifiers 5-12
6. Managing ATP6100 Using the
Subsystem Control Facility (SCF)
Overview of the ATP6100 Subsystem SCF Interface 6-2
SCF Interface to ATP6100 6-2
ATP6100 Subsystem Objects 6-4
Object States 6-5
SCF Commands and Objects 6-6
Sensitive and Nonsensitive Commands 6-7
Wild-Card Support 6-7