Asynchronous Terminals and Printer Processes Configuration and Management Manual

Printer Profiles and Default Modifiers
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
4-12
Printer Modifiers
BAUD n
This modifier specifies the baud rate for the serial interface. The baud rate specified by
each serial printer profile is listed below.
CHAR n
This modifier specifies the number of data bits representing each character. Specify
CHAR7 or CHAR8 for ASCII transmission.
CLBFRAMESIZE n
This modifier changes the default frame size. If you specify a value larger than the
range, the IOP changes the value to the maximum allowed.
CLBRETRIES n
This modifier specifies the number of retries for requests. The default value allows
optimum resource use. A value larger than the default may result in excessive retries.
Application: Serial printers
Serial Printer Profile Baud Rate
All profiles except 5577 9600
5577 38400
Application: Serial printers
Default: The ASYNC_PRT serial printer profile specifies 7 data bits (CHAR7);
the 5512, 5515, 5516, 5573, 5574, and 5577 serial-printer profiles
specify 8 data bits (CHAR8).
Units: Bits
Range: 5 through 8
See also: CHECK, EVEN, NOCHECK, NONE, ODD
Application: SWAN/SWAN 2 concentrator
Default: n = 300
Units: Words
Range: 150 through 600
Application: SWAN/SWAN 2 concentrator
Default: n = 4
Range: 0 through 63