Asynchronous Terminals and Printer Processes Configuration and Management Manual
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 Configuration Quick Start
- 2 Overview of the ATP6100 Subsystem
- 3 Configuring the ATP6100 Subsystem
- 4 Printer Profiles and Default Modifiers
- 5 Terminal Profiles and Default Modifiers
- 6 ManagingATP6100Usingthe SubsystemControlFacility(SCF)
- 7 PTrace Facility for ATP6100
- A ATP6100 Subsystem Error Messages
- B SCF Command Summary for ATP6100
- ABORT LINE Command
- ABORT SU Command
- ACTIVATE SU Command
- ALTER LINE Command
- ALTER SU Command
- INFO LINE Command
- INFO SU Command
- LOAD LINE Command
- START LINE Command
- START SU Command
- STATS LINE Command
- STATS SU Command
- STATUS LINE Command
- STATUS SU Command
- STOP LINE Command
- STOP SU Command
- SUSPEND SU Command
- SWITCH PROC Command
- TRACE LINE Command
- VERSION PROC Command
- C Moving to G-Series or H-Series RVUs
- Glossary
- Index
Printer Profiles and Default Modifiers
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
4-19
Printer Modifiers
NOAUTOANSWER
This modifier disables the AUTOANSWER function.
NOAUTOLOAD
This modifier specifies that the CONMGR will not automatically download the LIU if the
LIU responds to a status probe with an error condition.
NOETXFLOW
This modifier disables ETX(ENQ)/ACK flow-control handshake.
NOLINE1FORMF
This modifier specifies that a printer is to advance four lines following a form feed (FF).
NONE
This modifier specifies that the system use no parity with data it sends to the serial
printer.
NORC
This modifier disables the reverse channel modem option.
Application: Serial printers
See also: AUTOANSWER
Application: SWAN/SWAN 2 concentrator
See also: AUTOLOAD
Application: Serial printers
See also: ETXFLOW
Application: Currently unsupported
Note. The NOLINE1FORMF modifier has no effect on the ATP6100 line-handler process
running on G-series or H-series RVUs.
Application: Serial printers
See also: CHECK, EVEN, NOCHECK, ODD
Application: Unsupported on printers
Note. The NORC modifier in a printer profile has no effect on the ATP6100 line-handler
process running on G-series or H-series RVUs.