Asynchronous Terminals and Printer Processes Configuration and Management Manual
Table Of Contents
- What’s New in This Manual
- About This Manual
- 1 Configuration Quick Start
- 2 Overview of the ATP6100 Subsystem
- 3 Configuring the ATP6100 Subsystem
- 4 Printer Profiles and Default Modifiers
- 5 Terminal Profiles and Default Modifiers
- 6 ManagingATP6100Usingthe SubsystemControlFacility(SCF)
- 7 PTrace Facility for ATP6100
- A ATP6100 Subsystem Error Messages
- B SCF Command Summary for ATP6100
- ABORT LINE Command
- ABORT SU Command
- ACTIVATE SU Command
- ALTER LINE Command
- ALTER SU Command
- INFO LINE Command
- INFO SU Command
- LOAD LINE Command
- START LINE Command
- START SU Command
- STATS LINE Command
- STATS SU Command
- STATUS LINE Command
- STATUS SU Command
- STOP LINE Command
- STOP SU Command
- SUSPEND SU Command
- SWITCH PROC Command
- TRACE LINE Command
- VERSION PROC Command
- C Moving to G-Series or H-Series RVUs
- Glossary
- Index
Terminal Profiles and Default Modifiers
Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003
5-19
Terminal Modifiers
For ETXFLOW, DELAYTIME n designates the interval that the system waits for an
acknowledgment before it returns a NOT READY error to the application program.
DEVPROT
This modifier specifies the protocol for the subdevice and should not be altered.
DEVRSIZE n
This modifier allows you to specify a record size for a specific subdevice connected to
the line interface unit (LIU).
DEVSUBTYPE n
This modifier allows you to specify a subtype for a specific subdevice connected to the
line interface unit (LIU).
The default DEVSUBTYPE specified by each profile is listed below.
DEVTYPE n
This modifier allows you to specify the device type for a specific subdevice connected
to the line interface unit (LIU).
Application: SWAN/SWAN 2 concentrator
Default: 0
Application: All terminals
Default: Terminal profiles: n = 80, except n = 132 for 6603 and 6604 profiles
Units: Characters (bytes)
Range: 1 through 4095
Application: All terminals
See also: DEVTYPE
Terminal Profile DEVSUBTYPE n
6401, 6402, ASYNC_TERM 0
6511, 6512 1
6520, 6524 2
6526, 6528, 653x 4
6603, 6604 32
Application: All terminals
Default: 6 for all terminal profiles
See also: DEVSUBTYPE