Asynchronous Terminals and Printer Processes Configuration and Management Manual

Table Of Contents

Terminal Profiles and Default Modifiers

Asynchronous Terminals and Printer Processes Configuration and Management Manual—424280-003

5-26

Terminal Modifiers

NOAUTOLOAD

This modifier specifies that the CONMGR will not automatically download the LIU if the

LIU responds to a status probe with an error condition.

NOBS

This modifier specifies that the hard-copy terminal is not to backspace over a character

when the backspace key is pressed.

NOCHECK

This modifier specifies that no parity-checking be performed on data sent from the

terminal.

NOECHO

If this modifier is specified, HARD and FULL are also in effect. This configuration

permits simultaneous reading and writing on one terminal, which is configured as two

separate devices (requiring two ports on the terminal concentrator and a special

cable). Each device is accessed as a separate file.

NOECHOBREAK

This modifier disables the echo break function.

NOINTCHAR

This modifier directs the concentrator to ignore interrupt characters received from the

terminal.

Application: SWAN/SWAN 2 concentrator