Asynchronous Terminals and Printer Processes Programming Manual

CONSOLE MESSAGES
Console Error Messages Sent by ATP6100
3. Set frame size request timed out, or
4. Response to abort previous frame timed out.
%1004 Problem in queuing or dequeuing a subdevice.
parameter-4 = subdevice number
%1005 Bad subdevice number during a checkpoint
operation.
parameter-4 = subdevice number
%1006 Subdevice error on a CMI message to CLIP.
parameter-4 = function/modifier
parameter-5 = error returned
%1011 Requested buffer size greater then MAXLOCALAREA.
%1012 Level 3 tried to release a nonexistent I/O buffer.
This is a fatal error, and process goes to error
loop.
%1013 Failed to get a request buffer.
%1014 CLIP test interval set to zero.
%1015 Frame size larger then CLB buffer size.
%1016 Improper frame size received for receive buffer
available.
parameter-4 = received size
parameter-5 = CLB buffer size
%1023 CLIP received frame that had one of the following
format errors:
1. CLIP request ID <> active request's LCB
address.
2. CLIP TIN field < 2 bytes.
%1026 CSM Activate Path request failed.
parameter-4 = LCB.P1
parameter-5 = LCB.P5
A-2 November 1987