Asynchronous Terminals and Printer Processes Programming Manual

DIP SWITCH SETTINGS FOR 5573 PRINTERS
Tandem Asynchronous Selection
TANDEM ASYNCHRONOUS SELECTION |
|
|
Dip switch 7 determines whether the 5573 printer is operating |
in Tandem asynchronous mode. Depending on the printer, the |
asynchronous mode can use Tandem Asynchronous Protocol (TAP) |
or Transparent Tandem Asynchronous Protocol (T-TAP). For 5573 |
printers, T-TAP applies. The asynchronous mode must be set to |
ensure that the printer properly recognizes the escape sequences |
sent by the application program. This dip switch must always be |
set to OPEN. |
|
There is no corresponding SETMODE operation. |
November 1987 G-3