Atalla Boxcar Reference Guide (G06.24+)

Atalla Boxcar Reference Guide—526564-005

BOXCAR-SOCKET-RESET-LEVEL 500 Specifies the frequency which Boxcar

will check for, and attempt to restore,

invalid sockets. The value specified,

which is multiplied by 2000, is the

number of commands received by

Boxcar before it will attempt to restore

any invalid sockets.

Setting this value to a low value will

increase overhead and degrade Boxcar

performance.

BOXCAR-SOCKET-TIMEOUT 1000 Specifies the time, in hundredths of a

second, for a socket open to complete.

BOXCAR-TCPIP-PROCESS-NAME Specifies the TCP/IP process used to

communicate with the NSP. If this

parameter is not specified, Boxcar will

use the default TCP/IP process for the

terminal used to start Boxcar. If no

default TCP/IP process has been

specified for the terminal, Boxcar logs

an error and terminates.

Note. The following Boxcar parameters are no longer supported and must not be used:

BOXCAR-A7K-HDR, BOXCAR-A7K-IMAGE, BOXCAR-CLEAR-NLCHECK,

BOXCAR-DOWNLOAD-A7K, BOXCAR-NO-INIT,

BOXCAR-RESPONSE-MODE, BOXCAR-TAPECOM-DELAY, BOXCAR-TAPECOM-INFILE,

BOXCAR-TAPECOM-OUTFILE, and BOXCAR-WCOUNT.

Table 1. Boxcar Parameters (page 2 of 2)

Command Default Description