Atalla Boxcar Reference Guide (G06.24+)

Atalla Boxcar Reference Guide—526564-005
15
Executing the Obey File
Once the obey file is modified, execute the obey file. In the example below the
modified obey file is called STRTBOX. At the TACL prompt, type the following including
the space:
TACL> obey strtbox
VPROC information
GMT Binder timestamp: 23APR2009 18:02:53
Version procedure: T0409D45_15MAY2009_D45AAK
Version procedure: T8432D44_01DEC97_CRTLMAIN
Version procedure: T8432D44_01DEC97_CRTLNS
Native Mode: runnable file
Contacting Atalla Technical Support
Before contacting Atalla Technical Support, please read this document. Many of the
common product questions are covered in this guide. If you are still unable to find
answers to your questions, contact Atalla Technical Support. Atalla Technical Support’s
normal working hours are 8 am to 5 pm, Pacific Standard Time, Monday through
Friday. Atalla Technical Support provides assistance for customers and field personnel
who have questions or problems with the installation, setup and use of Atalla
equipment or products. When requesting support, please have the following
information available as it will enable us to efficiently answer your question or solve the
problem you are encountering:
•
Type and model of Atalla equipment
•
Version of NSP software
•
Boxcar software version (use the VPROC command to obtain this information)
•
Type of system it is attached to or installed in (include operating system version)
•
Exact nature of the problem. Provide as much detail as possible
Customers can contact Atalla Technical Support by:
By e-mail:
[e-mail]
By telephone:
800-500-7858 (U.S. only)
or
408-447-8715 (outside U.S.)
Note. If you renamed the obey file, be sure to type the name of your new obey file.