ATM Adapter Installation and Support Guide

Installing an ATM3SA Adapter
ATM Adapter Installation and Support Guide—420013-002
2-8
Unpack and Install the ATM3SA Adapter
Figure 2-5 shows how to connect the grounding clip to the ventilation holes on the PMF
adapter or IOMF adapter.
Figure 2-4. ESD Protected Environment
System Enclosure (Appearance Side)
ESD wriststrap clipped to
door latch stud (or to any
exposed, unpainted, metal
surface on the enclosure
frame.)
ESD wriststrap
with clip
ESD floor mats
ESD antistatic table mat.
Mat should be connected to a soft ground
(1 megohm min. to 10 megohm max.)
Clip 15 inch straight
ground cord to screw
on grounded outlet
cover.
VST693.vsd