ATM Adapter Installation and Support Guide

Installing an ATM3SA Adapter
ATM Adapter Installation and Support Guide—420013-002
2-10
Unpack and Install the ATM3SA Adapter
2. Push the ATM3SA adapter to the rear of the slot, but don't force it.
Figure 2-7
shows how to install an ATM3SA adapter.
Figure 2-6. Ejector in Full-Open Position
Caution. Apply equal pressure to both the top and bottom of the ATM3SA adapter when
pushing it into the slot to avoid damaging the connector pins. If pins are damaged, both the
ATM3SA adapter and the backplane (or enclosure) must be replaced.
VST500.vsd