ATM Adapter Installation and Support Guide

Contents
ATM Adapter Installation and Support Guide—420013-002
ii
3. Replacing an ATM3SA Adapter (continued)
3. Replacing an ATM3SA Adapter (continued)
Stop the Communications Lines That Are Using the ATM3SA Adapter 3-7
Determine the Physical Location of the ATM3SA Adapter 3-9
Abort the ATM3SA Adapter 3-10
Verify That the ATM3SA ADAPTER Object Is in the STOPPED State 3-11
Label the Communications Cables Connected to the ATM3SA Adapter 3-11
Replace the ATM3SA Adapter 3-13
Review Standard Operating Practices 3-14
Remove the ATM3SA Adapter 3-15
Inspect the Replacement ATM3SA Adapter and Backplane 3-17
Unpack and Install the Replacement ATM3SA Adapter 3-18
Check the Installation of the Replacement ATM3SA Adapter 3-21
Resume Operations 3-22
Verify That the Replacement Adapter is Started 3-22
Start the Replacement ATM3SA Adapter 3-23
Restart the Communications Lines 3-23
Verify that the Communications Lines are Restarted 3-24
Resume Customer Applications 3-25
A. ATM3SA Adapter Configuration Form
Safety and Compliance
Glossary
Index
Examples
Example 3-1. SCF INFO SUBNET Command 3-4
Example 3-2. SCF LISTDEV Command 3-5
Example 3-3. SCF LISTDEV Command 3-5
Example 3-4. SCF INFO LINE Command 3-6
Example 3-5. SCF INFO LINE Command 3-6
Example 3-6. SCF INFO LINE Command 3-7
Example 3-7. SCF STATUS LINE Command 3-8
Example 3-8. SCF STATUS PATH Command 3-8
Example 3-9. SCF STATUS DEVICE Command 3-8
Example 3-10. SCF STATUS SUBNET Command 3-9
Example 3-11. SCF INFO ADAPTER Command 3-10
Example 3-12. SCF STATUS ADAPTER Command 3-23