ATM Adapter Installation and Support Guide

Replacing an ATM3SA Adapter
ATM Adapter Installation and Support Guide—420013-002
3-6
Identify Communications Lines Using the ATM3SA
Adapter
a. For Expand-over-ATM lines, scan the output of the command for the name of
the ATM line. Make a note of the Expand-over-ATM lines that use the ATM line.
b. For Expand-over-IP lines, scan the output of the command for the TCP/IP
process and IP address used by the Expand-over-IP line, then compare this
information to the TCP/IP processes and IP addresses that you found in Step
1. Make a note of the Expand-over-IP lines that use these TCP/IP processes
and IP addresses.
Example 3-4 shows the SCF INFO LINE command with the DETAIL option for an
Expand-over-ATM line that uses a permanent virtual circuit (PVC).
The ATM line is shown in the Associatedev field. In this example, the Expand-
over-ATM line named $ATMH uses the ATM line named $AM2.
Example 3-5 shows the SCF INFO LINE command with the DETAIL option for an
Expand-over-ATM line that uses a switched virtual circuit (SVC).
The ATM line is shown in the Associatedev field. In this example, the Expand-
over-ATM line named $ATMH1 uses the ATM line named $AM2.
Example 3-6 shows the SCF INFO LINE command with the DETAIL option for an
Expand-over-ATM line that uses a switched virtual circuit (SVC).
Example 3-4. SCF INFO LINE Command
->INFO LINE $ATMH, DETAIL
EXPAND Detailed Info LINE $ATMH
*Associatedev...$AM2 *Associatesubdev #IP
Rsize........ 3 *Speed.......... 74666 Delay......... 0:00:00.10
Framesize.... 132 Txwindow....... 7 *Timeinactivity 0:00:00.00
*Maxreconnects 0 *Timerreconnect 0:00:30.00 *Aftermaxretries PASSIVE
*Timerprobe 0:00:30.00 *Retryprobe..... 3 Startup....... OFF
L2Protocol... Net^Atm ConnEp.........%H30070984 ListenEp...... %H30112778
*CallType..... PVC VPI............ 0 VCI........... 0
*PvcName...... PVC01
Example 3-5. SCF INFO LINE Command
->INFO LINE $ATMH1, DETAIL
EXPAND Detailed Info LINE $ATMH1
*Associatedev.. $AM2 *Associatesubdev #IP
Rsize........ 3 *Speed.......... 74666 Delay......... 0:00:00.10
Framesize.... 132 Txwindow....... 7 *Timeinactivity 0:00:00.00
*Maxreconnects 0 *Timerreconnect 0:00:30.00 *Aftermaxretries PASSIVE
*Timerprobe 0:00:30.00 *Retryprobe..... 3 Startup....... OFF
L2Protocol... Net^Atm ConnEp.........%H30070984 ListenEp...... %H30112778
*CallType..... SVC VPI............ 0 VCI........... 0
*AtmSel....... %H80
*DestAtmAddr.. (ISONSAP:%H47009181000100006170597C0140000C80001000)