ATM Adapter Installation and Support Guide

Replacing an ATM3SA Adapter
ATM Adapter Installation and Support Guide—420013-002
3-8
Stop the Communications Lines That Are Using the
ATM3SA Adapter
Note that the line is in the STOPPED state.
b. Use the SCF STATUS PATH command for an Expand multiline path:
STATUS PATH $path-name
Example 3-8 shows the output of these commands.
Note that the path is in the STOPPED state.
3. Stop the WAN subsystem input/output processes (IOPs).
Use the SCF STOP DEVICE command:
STOP DEVICE $ZZWAN.#device-name
4. Verify that the WAN subsystem IOPs are in the STOPPED state.
Use the SCF STATUS DEVICE command:
STATUS DEVICE $ZZWAN.#device-name
Example 3-9
shows the output of this command.
Note that the WAN subsystem input/output process (IOP) is in the STOPPED
state.
Example 3-7. SCF STATUS LINE Command
->STATUS LINE $LINE1
EXPAND Status LINE
Name State PPID BPID CIU-Path ConMgr-LDEV
$LINE1 STOPPED 2, 10 3, 7 A 91
Example 3-8. SCF STATUS PATH Command
->STATUS PATH $PATH
EXPAND Status PATH
Name State PPID BPID Lines #
$PATH STOPPED 2, 15 3, 15 2
Example 3-9. SCF STATUS DEVICE Command
->STATUS DEVICE $ZZWAN.#LINE1
WAN Manager STATUS DEVICE for DEVICE \COWBOY.$ZZWAN.#LINE1
State :........ STOPPED
LDEV number.... 110
PPIN........... 2 ,13 BPIN......... 3 ,14