ATM Adapter Installation and Support Guide

Contents
ATM Adapter Installation and Support Guide—420013-002
iii
Examples (continued)
Examples (continued)
Example 3-13. SCF STATUS SUBNET Command 3-24
Example 3-14. SCF STATUS DEVICE Command 3-24
Example 3-15. SCF STATUS LINE Command 3-25
Example 3-16. SCF STATUS PATH Command 3-25
Figures
Figure 1-1. How HP Subsystems and Utilities Access an ATM3SA Adapter 1-3
Figure 2-1. Completed ATM3SA Adapter Form 2-3
Figure 2-2. ATM3SA Adapter Slot Locations 2-4
Figure 2-3. ATM3SA Installed in a System Enclosure 2-5
Figure 2-4. ESD Protected Environment 2-8
Figure 2-5. Grounding Clip 2-9
Figure 2-6. Ejector in Full-Open Position 2-10
Figure 2-7. Installing an ATM3SA Adapter 2-11
Figure 2-8. ATM3SA Adapter Hardware Connection 2-12
Figure 3-1. ATM3SA Adapter Planning Worksheet 3-3
Figure 3-2. ATM3SA Adapter Slot Locations 3-12
Figure 3-3. ESD Protected Environment 3-15
Figure 3-4. Grounding Clip 3-16
Figure 3-5. Removing an ATM3SA Adapter 3-17
Figure 3-6. Ejector in Full-Open Position 3-19
Figure 3-7. Installing an ATM3SA Adapter 3-20
Figure 3-8. ATM3SA Adapter Hardware Connection 3-21
Figure A-1. ATM3SA Adapter Configuration Form A-2
Tables
Table i. vii
Table 2-1. Part Numbers for ATM3SA Adapter 2-1
Table 2-2. Preparation Checklist 2-1
Table 2-3. Installation Checklist 2-6
Table 3-1. Part Numbers for ATM3SA Adapter 3-1
Table 3-2. Preparation Checklist 3-2
Table 3-3. Replacement Checklist 3-13
Table 3-4. Replacement Checklist 3-22