ATM Adapter Installation and Support Guide

Replacing an ATM3SA Adapter
ATM Adapter Installation and Support Guide—420013-002
3-17
Inspect the Replacement ATM3SA Adapter and
Backplane
5. Place the ATM3SA adapter in an ESD protective bag and return it to its original
packing container.
Inspect the Replacement ATM3SA Adapter and Backplane
Visually inspect the ATM3SA adapter and the backplane connector for damage. Use a
flashlight, if necessary, to check for bent or broken pins. You can damage pins by
bumping or jamming the ATM3SA adapter's shell against a surface, which can partially
Figure 3-5. Removing an ATM3SA Adapter
Note. Whenever you handle an ATM ServerNet adapter (ATM3SA), follow standard operating
practices to avoid damage to the equipment. See Review Standard Operating Practices
on
page 3-14.
VST007.vsd