ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-43
DUMP Command
PVC pvc-name
specifies the name of the PVC object to be deleted. The pvc-name has the form
$AM1.#IP.PVC1.
Considerations
The PVC object must be in the STOPPED state with no registered users before it can
be deleted.
Examples
The first example deletes the PVC named $AM1.#IP.PVC01 from the ATM
subsystem. The second example deletes all AM1 PVCs:
-> DELETE PVC $AM1.#IP.PVC01
-> DELETE PVC $AM1.#IP.*
DUMP Command
The DUMP command initiates dumping of the objects memory into a dumpfile. The
dumpfile can be used for troubleshooting.
This is a sensitive command.
The DUMP command is supported for the ATM subsystem object: ADAPTER
Considerations
•
The object must be in the STOPPED summary state before it can be dumped.
•
For more information enter: HELP subsys cmd object-type
-> HELP ATM DUMP object-type
DUMP ADAPTER Command
The DUMP ADAPTER command initiates dumping of the ADAPTER memory. The
DUMP command dumps the ADAPTER memory after the ADAPTER has abnormally
terminated.
This is a sensitive command.