ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-44
INFO Command
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ADAPTER adapter-name
specifies the name of the ADAPTER to be dumped. The ADAPTER name has the
form $AM1.
DUMPFILENAME
specifies the dump file to be used by AMP. If a dump file is not specified, the
default value is used.
Considerations
•
The object must be in the STOPPED state before you can dump the ADAPTER
memory.
•
If the DUMPFILENAME is not specified, the default value assigned by the ADD
ADAPTER command is used.
Example
This example dumps the ADAPTER:
-> DUMP ADAPTER $AM1, DUMPFILENAME $DATA00.ATM.DUMP
INFO Command
The INFO command displays the current attribute settings for ATM subsystem objects.
This is a nonsensitive command.
The INFO command is supported for the following ATM subsystem objects:
•
ADAPTER
•
ATMSAP
•
LINE
•
PROCESS
•
PVC
•
SUBSYS
DUMP [/OUT file-spec/] ADAPTER-name
[, DUMPFILENAME string ]