ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-45
INFO ADAPTER Command
•
SVC
For more information enter: HELP subsys cmd object-type
-> HELP ATM INFO object-type
INFO ADAPTER Command
The INFO ADAPTER command displays current attribute settings for ADAPTER
objects.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ADAPTER adapter-name
specifies the name of the ADAPTER for which information is to be displayed. If you
do not specify an ADAPTER, the SCF subsystem displays information for all ATM
adapters.
SUB { ALL | NONE | ONLY }
selects the subordinate objects the command affects.
ALL
specifies that the named object and the subordinate objects are affected.
NONE
specifies that the name object is affected but the subordinate objects are not.
ONLY
specifies that only the subordinate objects are affected.
Default: NONE.
Considerations
If the ADAPTER is not in a STARTED state, the information displayed is extracted from
the configuration database.
INFO [/OUT file-spec/ ] ADAPTER adapter-name
[ , SUB { ALL | NONE | ONLY ]