ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-46
INFO ADAPTER Command
INFO ADAPTER Display
The display for the INFO ADAPTER command is as follows:
The definitions of the fields in the INFO ADAPTER displays follow:
LOCATION (grp, mod, slot)
specifies the group, module, and slot of the adapter you are adding to the ATM
subsystem and identifies the ADAPTER in terms of its physical location in the
system enclosure.
The value is defined by the LOCATION attribute of the ADD ADAPTER command.
ACCESSLIST
specifies the CPUs from which the ADAPTER is made accessible.
The value is defined by the ACCESSLIST attribute of the ADD ADAPTER
command.
-> info ada $am1
ATM Info ADAPTER \KIKI.$AM1
LOCATION (grp,mod,slot).. 1 ,1 ,54
ACCESSLIST............... 0, 1, 2, 3
AMP Filename (in use).... \KIKI.$SYSTEM.SYS01.AMP
*AMPFILENAME ............ $SYSTEM.SYS*.AMP
DownLd Filename (in use). \KIKI.$SYSTEM.SYS01.C7838P00
*DLFILENAME .............$SYSTEM.SYS*.C7838P00
Downld File Version......T7838G06^04APR99^30Mar99
Dump Filename (in use)... $OSS.DMPAM1.C7838D00
*DUMPFILENAME ........... $OSS.DMPAM1.C7838D00
Firmw Filename (in use).. \KIKI.$SYSTEM.SYS01.C8158R00
*FIRMWFILENAME .......... $SYSTEM.SYS*.C8158R00
Firmw File Version.......
*AUTORELOAD.............. ON *AUTODUMP................ ON
*AUTOFIRMUP.............. ON
*PROBECOUNT.............. 10 *PROBEINTERVAL (0.01 sec) 300
MAC Address.............. 08 00 8E 00 76 69H
Product Id............... T3860 Adapter Type............. ATM
Part Number.............. 108502
Serial Number............ V0AU1F Hardware Revision.... X31-00
Media Type............... MULTIMODE Transmit Type......... SONET
*SYSDESC.................
*SYSOBJID................
*SYSCONTACT..............
*SYSNAME.................
*SYSLOCATION.............
*SYSSERVICE.............. 4
*DFC..................... 2
*DFT (msec).............. 1