ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-47
INFO ADAPTER Command
AMP Filename (in use)
specifies the program file currently being used by the AMPs.
AMPFILENAME
specifies the program file that was configured for the ADAPTER.
The value is defined by the AMPFILENAME attribute of the ADD ADAPTER
command.
DownLd Filename
specifies the name of the download file currently downloaded or the name of the
file to be downloaded to the ADAPTER.
DLFILENAME
specifies the name of the download file that was configured for the ADAPTER.
The value is defined by the DLFILENAME attribute of the ADD ADAPTER and
ALTER ADAPTER command.
DownLd File Version
specifies the version information obtained from the download file currently in use.
Dump Filename (in use)
specifies the dump file currently in use or the dump file to be used by AMP to dump
the ADAPTER memory.
DUMPFILENAME
specifies the dump file that was configured for the ADAPTER.
The value is defined by the DUMPFILENAME attribute of the ADD ADAPTER and
ALTER ADAPTER command.
Firmw Filename (in use)
specifies the firmware file used to update the ADAPTER firmware.
FIRMWFILENAME
specifies the firmware file that was configured for the ADAPTER.
The value is defined by the FIRMWFILENAME attribute of the ADD ADAPTER and
ALTER ADAPTER command.
Firmw File Version
specifies the version information obtained from the download file currently in use.
This information is obtained from the file and not the ADAPTER.