ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-49
INFO ADAPTER Command
The value is defined by the SYSDESC attribute of the ADD ADAPTER and ALTER
ADAPTER commands.
SYSOBJID
specifies the vendor’s authoritative ID of the Network Management subsystem
contained in the entity. The string specified must be in the range 0 through 256.
This attribute is for informational purposes only.
The value is defined by the SYSOBJID attribute of the ADD ADAPTER and ALTER
ADAPTER commands.
SYSCONTACT
specifies the contact person for this managed node. The string specified must be in
the range 0 through 256. This attribute is for informational purposes only.
The value is defined by the SYSCONTACT attribute of the ADD ADAPTER and
ALTER ADAPTER commands.
SYSNAME
specifies the system name. The string specified must be in the range 0 through
256. This attribute is for informational purposes only.
The value is defined by the SYSNAME attribute of the ADD ADAPTER and ALTER
ADAPTER commands.
SYSLOCATION
specifies the physical location of the device. The string specified must be in the
range 0 through 256. This attribute is for informational purposes only.
The value is defined by the SYSLOCATION attribute of the ADD ADAPTER and
ALTER ADAPTER commands.
SYSSERVICE
specifies the services offered for this entity. This attribute is for informational
purposes only.
The value are defined as:
1 - Physical (for example, repeaters)
2 - Datalink/subnetwork (for example, bridges)
3 - Internet (for example, IP routers)
4 - End-to-end (for example, IP hosts)
5 - Undefined