ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-50
INFO ATMSAP Command
6 - Undefined
7 - Applications (for example, mail relays)
The value is defined by the SYSSERVICE attribute of the ADD ADAPTER and
ALTER ADAPTER commands.
The default value is 4.
DFC digit 1-50
specifies how many packets the adapter receives before sending them to the host.
If the DFC is set to 1, packets are forwarded immediately, and DFT is disabled.
The default is 2.
DFT (1-200)/1000th seconds
specifies how many milliseconds the adapter waits before packets are sent to the
host. The default is 1.
INFO ATMSAP Command
The INFO ATMSAP command displays information about the attributes of ATMSAP
object.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ATMSAP object-list
specifies the name of the ATMSAP for which information is to be displayed. If you
do not specify an ATMSAP, the SCF subsystem displays information for all ATM
ATMSAP objects.
INFO [/OUT file-spec/ ] ATMSAP object-list