ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-53
INFO LINE Command
INFO LINE Command
The INFO LINE command displays the current attribute setting for the specified LINE.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
LINE line-name
specifies the name of the LINE for which information is to be displayed. If you do
not specify a LINE, the SCF subsystem displays information for all line objects.
INFO LINE Display
The display for the INFO LINE command is as follows:
The definitions of the fields in the INFO LINE displays follow:
ATMADDR
specifies the configured ATM address for the LINE. The address is alterable using
the ATMADDR attribute in the ALTER LINE command.
Default: 0.
INFO [/OUT file-spec/ ] LINE line-name
-> INFO LINE $AM1
ATM Info LINE \HANSOLO.$AM1
*ATMADDR................... ISONSAP: 47 00 05 80 FF E1 00 00 00 F2
1A 29 EB 00 00 00 00 00 A3 00H
Registered Atm Address..... ISONSAP: 47 00 05 80 FF E1 00 00 00 F2
1A 29 EB 00 00 00 00 00 A3 00H
*UNIVERSION................ 3.0
UME
*UMECOMMUNITY..............
*UMEVPI.................... 1 *UMEVCI..................... 16
*MAXPVCVPI................. 100 *MAXPVCVCI.................. 100
PHYSICAL LAYER
Phys Layer Media Type...... MULTIMODE Phys Layer Xmit Type....... SONET
ATM LAYER
*MAXVPCS.................. 100 *MAXVCCS.................... 1000
*MAXVPIBITS............... 8 *MAXVCIBITS................. 10
*UNIPORTTYPE.............. Private