ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-54
INFO LINE Command
Registered Atm Address
specifies the registered ATM address for the LINE. Currently, the registered and
configured ATM addresses are the same.
UNIVERSION
specifies the UNI version supported by the LINE. The value is defined by the
UNIVERSION attribute of the ALTER LINE command.
Default: 3.1.
UME:
UMECOMMUNITY
specifies the UNI Management Entity (UME) version supported by the LINE. The
value is defined by the UMEVPI attribute of the ALTER LINE command.
Default: “ ”.
UMEVPI
specifies the VPI used by the UME. The value is defined by the UMEVPI attribute
of the ALTER LINE command.
Default: 1.
UMEVCI
specifies the VCI used by the UME. The value is defined by the UMEVCI attribute
of the ALTER LINE command.
Default: 16.
MAXPVCVPI
specifies the maximum VPI value that can be used for PVCs. The value is defined
by the MAXPVCVPI attribute of the ALTER LINE command.
Default: 100.
MAXPVCVCI
specifies the maximum VCI value that can be used for PVCs. The value is defined
by the MAXPVCVCI attribute of the ALTER LINE command.
Default: 100.
Physical Layer:
Phys Layer Media Type
specifies the physical media type used.