ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-56
INFO PROCESS Command
INFO PROCESS Command
The INFO PROCESS command displays the current attribute setting for the specified
PROCESS.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
PROCESS process-name
specifies the name of the PROCESS for which information is to be displayed. If
you do not specify a process name, SCF displays the list of all processes.
INFO PROCESS Display
The display for the INFO PROCESS command is as follows:
The definitions of the fields in the INFO PROCESS display is as follows:
Program File Name
specifies the program file name currently in use by AMP.
The value is defined by the AMPFILENAME attribute in the ADD ADAPTER
command.
Program File Creation
specifies the program file creation timestamp.
Library File Name
specifies the library file name currently in use by AMP.
The value is defined by the LIBFILENAME attribute in the ADD ADAPTER
command.
INFO [/OUT file-spec/ ] PROCESS process-name
-> INFO PROCESS $ZAM11
ATM Info PROCESS \HANSOLO.$ZAM11
Program File Name................. \HANSOLO.$SYSTEM.SYS01.AMP
Program File Creation............. 02 Feb 1998, 9:19:21.836
Library File Name.................
Library File Creation............. 00 0000, 0:00:00.0
Configuration File Name........... $SYSTEM.ZSYSCONF.CONFIG
Configuration File Creation....... 01 Dec 1997, 13:58:00.47
Ems File Name..................... $ZLOG