ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-58
INFO SUBSYS Command
VPI
specifies the VPI. The value is defined by the VPI attribute in the ADD PVC or
ALTER PVC command.
VCI
specifies the VCI. The value is defined by the VCI attribute in the ADD PVC or
ALTER PVC command.
INFO SUBSYS Command
The INFO SUBSYS command displays the current attribute setting for the specified
SUBSYS object.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
SUBSYS subsys-name
specifies the name of the SUBSYS to for which information is to be displayed.
INFO SUBSYS Display
The display for the INFO SUBSYS command is as follows:
Program File Name
specifies the program file name currently in use by ASM.
Program File Creation
specifies the program file creation timestamp.
ATM Config File Name
specifies the ATM configuration file name.
INFO [/OUT file-spec/ ] SUBSYS subsys-name
-> INFO SUBSYS $ZZATM
ATM Info SUBSYS \HANSOLO.$ZZATM
Program File Name................ $HANSOLO.$SYSTEM.SYS01.ATMASM
Program File Creation............ 28 Jan 1998, 9:35:14.007
ATM Config File Name............. $SYSTEM.ZSYSCONF.CONFIG
ATM Config File Creation......... 01 Dec 1997, 13:58:00.475