ATM Configuration and Management Manual

SCF Commands
ATM Configuration and Management Manual—522307-003
4-65
START Command
START Command
The START command initiates the operation of the specified object. When the ATM
subsystem has successfully completed processing this command, the object is placed
in the STARTED or STARTING state.
This is a sensitive command.
The START command is supported for the following ATM subsystem objects:
•
ADAPTER
•
ATMSAP
•
LINE
•
PVC
•
SUBSYS
Considerations
•
When you use the START command, the object should be in the STOPPED
summary state.
•
Use the STATUS command to verify successful completion of the START
command.
•
For more information enter: HELP subsys cmd object-type
-> HELP ATM START object-type
START ADAPTER Command
The START ADAPTER command initiates the operation of the ADAPTER object. When
the subsystem has successfully completed processing this command, the ADAPTER
object is placed in the STARTED summary state.
Command Syntax
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
ADAPTER adapter-name
specifies the ADAPTER to be placed in the STARTED state.
START [/OUT file-spec / ] ADAPTER adapter-name
[ SUB { ALL | NONE | ONLY } ]