ATM Configuration and Management Manual

ATM Configuration and Management Manual—522307-003

About This Manual

This manual describes how to configure, operate, and manage the ATM subsystem on

a NonStop S-series server. The manual includes detailed descriptions of the SCF

commands used with the ATM subsystem and a quick-reference section showing the

command syntax.

Who Should Use This Manual

This manual is written for anyone who is responsible for installing, configuring,

managing, or monitoring the ATM subsystem on a NonStop S-series server.

What’s in This Manual

Table i summarizes the contents of this manual.

This manual also contains a glossary of technical terms and abbreviations used

throughout the text.

Note. NonStop S-series refers to the hardware that makes up the server. G-series refers to the

software that runs on the server.

Table i. Summary of Contents

Section Title This section . . .

1 Configuration Quick Start

Explains how to set up the initial ATM processes,

objects, and adapters on a NonStop S-series

server.

2 Overview of the ATM

Subsystem

Describes the components that make up the ATM

subsystem.

3 Configuring the ATM

Subsystem

Provides configuration information for the ATM

subsystem and describes the current

configuration restrictions.

4 SCF Commands

Provides a description and complete syntax for

the SCF commands applicable to the ATM

subsystem along with examples of how an user

might use those commands.

A SCF Command Summary

Provides a quick reference to the syntax of the

SCF commands for the ATM subsystem.

B ATM Event Messages

Describes event messages that can be returned

from the ATM subsystem.

C Tracing for QIO

Describes the TRACE command, which supports

ADAPTER, PROCESS, and SUBSYS objects for

the ATM subsystem.

D ATM Error Codes

Describes the ATM subsystem error codes.